Agmaster 2580 Series - 48" Constant Velocity Drive Shaft Assembly - (6 / 6 Spline)

Details:

 Complete Constant Velocity Tractor Half Shaft. Minimum C-to-C length: 48" (1210) mm; Total Collapsed C-to-C length: 58" (1462 mm). Tractor end: 1-3/8" 6 Spline. Implement end: 1-3/8" 6 Spline. Star style tubing, type B. For 2580 series. Fits Woods Rotary Cutters; Walterscheid WWE series.

*  It may be necessary to cut this driveline to length. Verify the length by ensuring that sufficient overlap of the drive tubes exists in all working positions without the possibility of bottoming out.

Size     2580
C-to-C Length     1210 MM/ 48"
Total Length     58"
Tractor     1 3/8" - 6 Spline
Implement     1 3/8" - 6 Spline
Tube Style     B
Series     2580

Replaces:    

• PM14507948     JOHN DEERE 
• PM14507955     JOHN DEERE
• VTE1045     VAPORMATIC
• W25801210-0101-A     EDCOR
• A-110680001     VERMEER
• 14507948     DRIVE-LINE
• 14507955     DRIVE-LINE

• AB81010     TISCO
• SW06324     JOHN DEERE EDI
• W14507948DS     CASE/IH
• W14507955DS     CASE/IH
• W2580-1210-01Z     EDCOR

This complete assembly includes the following:

    A-P10X90     Roll Pin, 10 MM x 90 MM, 2 pack x 2 qty
    A-WSC252580-A     Complete Safety Shield x 1 qty
    A-W097140-A     Inboard Yoke, used w/ S5 Profile Tubing x 1 qty
    A-W312209-A     Cross & Bearing Kit x 1 qty
    A-W331573     Inboard Yoke, used w/ S4GA Inner Profile Tubing x 1 qty
    A-W333336     Inner Profile Tube, w/ Drill Hole, S4GA x 1 qty
    A-W334109-A     Cross & Bearing Kit x 2 qty
    A-W341738-A     Outer Profile Tube, w/ Drill Hole, S5 x 1 qty
    A-W362428-A     Implement Yoke, 1 3/8" - 6 Spline w/ AS Lock x 1 qty
    A-W363617-A     Tractor Yoke, Splined 1 3/8" - 6 Spline w/ AS Lock x 1 qty
    A-W365725-A     Center Housing x 1 qty